Home > Warewashing
Choose a sub category:
Dish Racks, Dollies Disposals, Disposers, Waste Drains Faucets, Assemblies
Flatware Washing, Storage Glass Washers, Glass Racks etc. Misc Warewashing
Pre Rinse, Spray Units Sinks, Dishtables Warewashers, General
Water, Booster Heaters
Warewashing, Sinks
Sort By:
Page of 9
GW-120 062X C-9
The Redhead Glass Washer, upright, electric, (5) brush, (4) 7" brushes and (1) 8-3/4" brush, stainless steel base with rubber feet, brass bearings and nylon gears inside base, 1/3 HP, 4.3 amps, 115v/60/1-ph, 7' cord, NEMA 5-15P, CE Nozzle, swivel, 12" long, standard, stream regulator outlet, low-lead, chrome-plated brass, NSF (deduct cost of standard nozzle) (replaces B-1912-14) Compact Booster Heater, electric, 6-gallon storage capacity, electric operation, 9-KW, stainless steel front panel, powder-coated silver-gray hammertone body, 6" plastic non-adjustable legs, Castone tank, NSF, cUL, UL
314-16-3 314-16-3-18R HSA-10-FA
314 Series Coved Corner Sink, three compartment, 58-3/4"W x 27-1/2"D, 304 stainless steel construction, 16" wide x 20" front-to-back x 13-1/2" deep compartments, 9-1/2"H backsplash with 1" upturn & tile edge, 8" OC splash mount faucet holes, 2" euro-style edges on front & sides, includes (3) 3-1/2" basket drains, galvanized legs & side crossrails, adjustable bullet feet, NSF 314 Series Coved Corner Sink, three compartment, 74-3/8"W x 27-1/2"D, 304 stainless steel construction, 16" wide x 20" front-to-back x 13-1/2" deep compartments, 18" drainboard on right, 9-1/2"H backsplash with 1" upturn & tile edge, 8" OC splash mount faucet holes, 2" euro-style edges on front & sides, includes (3) 3-1/2" basket drains, galvanized legs & side crossrails, adjustable bullet feet, NSF Hand Sink, wall mount, 13-1/2" wide x 9-3/4" front-to-back x 6-3/4" deep bowl, 304 stainless steel construction, splash mount gooseneck faucet, P-trap & tail piece, basket drain, deep-drawn seamless design-positive drain, inverted "V" edge, NSF
HSA-10-FL 414-16-3 1524B
Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 304 stainless steel construction, splash mount gooseneck faucet, lever drain, deep-drawn seamless design-positive drain, inverted "V" edge, NSF 414 Series Coved Corner Sink, three compartment, 58-3/4"W x 27-1/2"D, 430 stainless steel top with 304 stainless steel sink bowls, 16" wide x 20" front-to-back x 13-1/2" deep compartments, 9-1/2"H backsplash with 1" upturn & tile edge, 8" OC splash mount faucet holes, 2" euro-style edge on front & sides, includes (3) 3-1/2" basket drains, galvanized legs & side crossbracing, adjustable plastic bullet feet, NSF Cutlery Bin, 21-5/8" x 12" x 3-3/4", 4 compartment, stackable, black, dishwasher safe, high density polyethylene, FDA approved (must be purchased in multiples of 12 each)
1524G 100 200
Cutlery Bin, 21-5/8" x 12" x 3-3/4", 4 compartment, stackable, gray, dishwasher safe, high density polyethylene, FDA approved (must be purchased in multiples of 12 each) Disposer, basic unit only, 1 Hp motor, heat treated aluminum alloy housing, UL, CSA, CE Disposer, basic unit only, 2 Hp motor, heat treated aluminum alloy housing, UL, CSA, CE
500 P914 S914
Disposer, basic unit only, 5 Hp motor, single support leg, heat treated aluminum alloy housing, UL, CSA, CE Pot/Pan Scrap Collector™, scrapping, pre-flushing & collecting system (widely accepted in areas where disposers are restricted), NEMA 4 HYDROLOGIC® control panel with patented operator sensor, two water saving modes (timed run & auto start/stop), safety line disconnect, LCD readout, salvage basin & silverware trap, scrap basket, 3/4 HP corrosion-resistant pump, pump intake screen, stainless steel construction, UL, CSA, CE, NSF Scrap Collector™, scrapping, pre-flushing & collecting system (widely accepted in areas where disposers are restricted), NEMA 4 HYDROLOGIC® control panel with patented operator sensor, two water saving modes (timed run & auto start/stop), safety line disconnect, LCD readout, salvage basin & silverware trap, scrap basket, 3/4 HP corrosion-resistant pump, pump intake screen, stainless steel construction, UL, CSA, CE, NSF
DF TEMPSTAR B-0107
Glasswasher, rotary design, 25" cabinet, 1200 glasses/hr, 12" glass clearance, polypropylene conveyor with clockwise rotation, upper & lower wash & rinse arms, (3) pump injection system, chemical sanitizing, cool water rinse, stainless steel construction, 208-230v/60/1-ph, 15.0 amps, NEMA 6-15P, NSF, cETLus, CSA (includes: authorized factory start-up) TempStar® Dishwasher, door type, high temperature electric tank heat with built-in booster, universal (straight-thru/corner) type, approximately (58) racks/hour capacity (0.89 gallons per rack), stainless steel exterior, universal timer, Sani-Sure, dishtable not included, cETLus, ETL-Sanitation, ENERGY STAR® Spray Valve Assembly, with hold down ring & rubber bumper
B-0107-C B-0107-J PMG-100
Spray Valve, low flow spray face, 0.65 GPM flow control, EPAct 2005 compliant Spray Valve, with low-flow spray tip, 1.07 gpm flow rate, 7.2 Ozf spray force, self-closing, gray, EPAct 2005 compliant Powermite® Booster Heater, gas, 4.75 gal storage capacity, blended phosphate water treatment system, low water cut-off, temp./pressure relief valve, pressure reducing valve, (2) temp./pressure gauges, indicator light & on/off switch, stainless steel tank & front, painted body & legs, 105,000 BTU, UL EPH Classified, ANSI/NSF 4, CSA, Made in USA
PMG-200 S-45 BR258184
Powermite® Booster Heater, gas, 4.75 gal storage capacity, blended phosphate water treatment system, low water cut-off, temp./pressure relief valve, pressure reducing valve, (2) temp./pressure gauges, indicator light & on/off switch, stainless steel tank & front, painted body & legs, 195,000 BTU, UL EPH Classified, ANSI/NSF 4, CSA, Made in USA Imperial Booster Heater, Electric, 16-gallon storage capacity, 45-KW, stainless steel front, custom fitting & Castone tank, NSF, cUL, UL Camrack® Base Rack, full size, (1) compartment, 19-3/4" x 19-3/4" inside rack height (3-1/4" inside & stack height), polypropylene, beige, NSF
BR258167 102-1125 S-36
Camrack® Base Rack, full size, (1) compartment, 19-3/4" x 19-3/4" inside rack height (3-1/4" inside & stack height), polypropylene, brown, NSF Pre-Rinse Basket, 20" L x 20" W x 2-1/4" D, stainless steel Imperial Booster Heater, Electric, 16-gallon storage capacity, 36-KW, stainless steel front panel, powder-coated silver-gray hammertone body, 6" plastic non-adjustable legs, Castone tank, NSF, cUL, UL
RL-30 17-202WL 21-133L
Dishwasher, undercounter, 23"W x 25"D x 33-1/2"H, 3.5kw built-in booster, approximately 30 racks/hour cap., auto fill, 2.8kw tank heater, pumped drain, continuous wash cycle, (1) plate & (1) flat rack, stainless steel interior & exterior, TempGuard™ final rinse temp control, thermostatic controls, 1 HP wash motor, cULus, UL EPH CLASSIFIED, UL-Sanitation, ANSI/NSF 3 Krowne Royal Series pre-rinse Assembly, single hole deck mount, double pantry, spring action flexible gooseneck, 38"H stainless steel hose with 15" overhang & 1.2 GPM spray head, built in check valves, includes wall bracket & mounting kit, chrome plated brass base, low lead compliant, ships pre-assembled, NSF (interchangeable with most brands) Krowne Royal Series Pre-Rinse Hose, 44", with grip, flexible stainless steel, Low Lead Compliant (interchangeable with most brands)